Like stagecoaches, swinging saloon doors and Pony Express riders, there are many innovations of the Old West that have long faded from use and live on only in Western movies and history books.
But there are still a few frontier staples that were so effective and ahead of their time that they remain in use today. Take, for instance, the intimidating octagonal barrels commonly found on the repeating rifles of that period. These heavy-duty workhorses sported added mass and extra weight to aid in heat absorption, making them the forerunners to the bull barrels used on modern target and varmint rifles.
So as a tip of our Stetson in honor of this timeless barrel style, we replaced the standard round barrel normally used on our world-famous rifles with a classic 20″ octagonal model, like those favored by the cowpunchers, lawmen, homesteaders and outlaws who blazed the trail westward across America. We rounded out this traditional look with an easy-to-adjust Marbles semi-buckhorn rear sight with a diamond insert and a highly visible brass beaded front sight seated in standard 3/8″ dovetail slots. A metal barrel band secures both the barrel and the high-capacity tubular magazine to the highgrade American walnut stock.
If you prefer a more modern look, the receiver is grooved so you can top off any rifle in this line with your choice of scopes. Both the stock and forearm are crafted of the same richly grained hand-finished American walnut typically found on rifles costing up to three times as much.
Specs:
General:
Canada Legal Classification | Non-Restricted | Action | Lever | |
Handedness | Ambidextrous | Optic Interface | Receiver Cover Integrated 3/8″ Dovetail | |
Rear Sight | Fully Adjustable Marble’s Semi-buckhorn w/ Diamond Insert | Front Sight | Drift Adjustable Brass Bead | |
Default Sight Radius (in; cm) | ~17.2; 43.5 | Grip Type | Stock Integrated Straight | |
Pistol Grip Cap | N/A | Trigger Type | Non-Adjustable | |
Trigger Material | Steel Blued | Trigger Compatibility | Henry H001 | |
Min Trigger Pull (lbs; N) | ~4; 17.8 | Max Trigger Pull (lbs; N) | ~4; 17.8 | |
Observed Trigger Pull (lbs) | ~4 | Safety | 1/4 Cock | |
Manual Safety Position | On Hammer | Magazine Interface | Fixed Tube | |
Magazine Compatibility | Henry H001, H003 | Max Magazine Capacity | 11 | |
Default Length (in; mm) | 38.5; 977.9 | Min Length (in; mm) | 38.5; 977.9 | |
Max Length (in; mm) | 38.5; 977.9 | Min Width (in; mm) | ~1.3; 32 | |
Max Width (in; mm) | ~1.3; 32 | Min Height (in; mm) | ~8; 213 | |
Max Height (in; mm) | ~8; 213 | Weight w/o Mag (lbs; kg) | N/A | |
Weight w/ Empty Mag (lbs; kg) | 6.25; 2.834952 | Accessory Interfaces | None |
Receiver:
Operating Mechanism | ~80° Throw, Tilting Block | Action Size | Standard | |
Receiver Type | Henry H001 | Lower Receiver Material | Metal | |
Lower Receiver Finish | Black | Upper Receiver Material | Metal | |
Upper Receiver Finish | Black | Stock Interfacing Mechanism | Direct to Receiver via Threaded Rear Tang Screw | |
Stock Interfacing Mechanism Material | Steel | Stock Interfacing Mechanism Finish | Black | |
Barrel Interfacing Mechanism | Directly Inserted Into Receiver | Barrel Securing Mechanism | Barrel Threads, (2) Receiver Cross Pins | |
Barrel Securing Mechanism Material | Steel | Barrel Securing Mechanism Finish | Standard | |
Recoil Lug | None | Recoil Lug Material | N/A | |
Recoil Lug Finish | N/A | Feed Type | Push | |
Ejection | Bolt Mounted Spring Loaded Ejector | Ejection Direction | Right | |
Bolt Type | (1) Piece Bolt | Bolt Material | Steel | |
Bolt Finish | Blued | Bolt Head Type | Integral Part of Bolt | |
Bolt Lock | (1) Tilting Locking Block | Operating Handle | Straight Lever Standard Size | |
Operating Handle Material | Metal | Operating Handle Finish | Black | |
Bolt Hold Open | None | Bolt Release | None | |
Trigger Guard Type | Part of Lever | Trigger Guard Material | Metal | |
Trigger Guard Finish | Black | Trigger Guard Engraving | None | |
Magazine Release Type | None | Magazine Release Position | N/A | |
Magazine Cutoff | None | Anti-Release Magazine Lock Mechanism | (1) Receiver Cross Pin |
Buttstock:
Stock Type | Receiver Attached Straight Grip Full Size | Stock Fit | Henry H001 | |
Stock Material | American Walnut | Stock Finish | Satin | |
Buttpad | Synthetic Black Textured | Adjustable Length of Pull | No | |
Default Length of Pull (in; cm) | 14; 35.56 | Min Length of Pull (in; cm) | 14; 35.56 | |
Max Length of Pull (in; cm) | 14; 35.56 | Adjustable Comb | No | |
Min Drop at Comb (in; cm) | ~1; 2.5 | Max Drop at Comb (in; cm) | ~1; 2.5 | |
Min Drop at Heel (in; cm) | ~1.5; 3.7 | Max Drop at Heel (in; cm) | ~1.5; 3.7 | |
Adjustable Cast | No | Adjustable Pitch | No |
Forend:
Forend Type | Mounted to Receiver, Barrel | Forend Fit | Henry H001 | |
Forend Material | American Walnut | Forend Finish | Satin Checkered w/ Metal Barrel Band |
Barrel:
Barrel Length (mm) | 508 | Caliber Marking | .17 HMR | |
Chamber Size | SAAMI Spec | Pressure Rating | SAAMI Spec | |
Barrel Profile | Octagon | Barrel Material | Steel | |
Barrel Finish | Blued | Chamber Finish | Standard | |
Rifling | 6 Groove | Twist Rate (in) | 1:9 | |
Muzzle Device | None | Muzzle Thread (in) | None |
Additional Information:
Model Number | H001TV |
Distributor Item Number | 1524-0011 |
Disclaimer:
Manufacturers, importers, suppliers, and distributors may make changes to their products without fanfare. Such changes can lead to discrepancies between the advertised product and the actual product in inventory. While International Shooting Supplies Ltd. endeavors to correctly describe the actual product in inventory, we will not be responsible for unintentional inaccuracies in text and images of the advertised product.