, ,

Hornady A-Tip® Match 6.5mm .264″ 135Gr ATULD 100 Count Box


Years of research and testing by the Hornady® Ballistic Development Group, combined with advanced manufacturing processes and quality control measures have led to the creation of the ultimate low drag, high performance match bullet.

Use of a new A-TIP® seating stem is required for optimal bullet seating (sold seperately).

Product Features:

Tip Design

  • Aluminum tip is precision machined and longer than polymer tips which moves the center of gravity and enhances inflight stability.
  • Aeroballistically advanced tip design results in tighter groups and reduced drag variability.
  • Perfect blend of ogive, tip length, bearing surface and optimized boattail by caliber.


  • Doppler radar verified low drag coefficient (high BC) bullets are forgiving of twist rate, seating depth and muzzle velocity.
  • Refined design of the AMP® bullet jacket offers industry leading uniformity and concentricity.


  • Right off the press – sequentially packaged, one clone after another for the ultimate in consistent performance.
  • Minimal handling throughout the manufacturing process ensures consistency from bullet to bullet.
  • Packaged with a polishing bag to prepare bullets for loading (bullets aren’t bulk washed after manufacture).


Sectional Density 0.277
Ballistic Coefficient (G1) 0.637
Ballistic Coefficient (G7) 0.321
Recommended Twist Rate 1:8.5″

Expanded Ballistic Coefficient Information:

Ballistic Coefficient (BC) values can, and usually do change in value with changes in velocity. Most bullets exhibit a lowering BC as velocity slows. The extent of how much a BC will change depends on each unique bullet shape. When comparing BCs of different bullets, it is important to use an apples-to-apples approach.

To do this, bullets should be compared at a given Mach number (e.g. Mach 1 = 1116.48 fps @ ICAO Standard Atmosphere). Mach number is the velocity of the bullet divided by the speed of sound. If a Mach number is unavailable, velocity can be used if the BCs are corrected to Standard Atmosphere which is fairly typical practice within the industry.

The majority of industry published BCs is measured over relatively short ranges of 100 to 300 yards, which corresponds to velocities around 2500 fps depending on muzzle velocities.

  • Mach 2.25 (2512 fps* and above) – Velocities above 2,500 fps and distances out to 300 yards.
  • Mach 2.0 (2232 fps*) – Use this for mid-range shooting where the bullet spends time in flight after slowing down.
  • Mach 1.75 (1953 fps*) – Use this for long-range shooting where much of the bullet flight occurs after velocity loss.
MACH 2.25 MACH 2 MACH 1.75
G1 0.637 0.626 0.613
G7 0.321 0.314 0.309

*Velocity at International Civil Aviation Organization (ICAO) Standard Atmosphere (Sea Level, 59 degrees F, 29.92 inHg, 0% Humidity).





Shopping Cart

Please note: International Shooting Supplies does not ship to addresses outside Canada.