,

Vortex® Venom® 1x26mm Reflex Sight 6 MOA Red Dot Sight w/ Weaver Mount

$389.99

Out of stock

Email when stock is available

Make your rifle, pistol, or shotgun even more poisonous with the Venom Red Dot sight. A 6 MOA dot promotes rapid target acquisition, while providing a precise point of aim—getting shots down range and on target fast.

The durable, machined aluminum housing ensures the unit will stand up to whatever you throw at it. High-quality, fully multi-coated lens offers a clean, wide field of view. Our top-load system makes changing the CR 1632 battery a snap and alleviates the need to remove the sight when switching the power source. The power and dot intensity controls are conveniently located on the left side of the unit. Flush 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze.

The Venom comes with a Picatinny mount—weighs 1.6 ounces with mount.

Features:

Optical:

  • Fully Multi-Coated: Multiple anti-reflective coatings on all air-to-glass surfaces increase light transmission.
  • Premium Wide-Field Lens: Exceptional edge-to-edge resolution.
  • Brightness Settings: Choose between 10 levels of brightness in manual mode or switch to auto mode.
  • Parallax Free All red dot and holographic sights will exhibit some small amount of parallax. Matching current industry practice, this small amount would be considered “parallax free” and will make a negligible difference in the Venom’s performance.

Construction:

  • Single-Piece Chassis: Compact and lightweight.
  • Waterproof: O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.
  • Shockproof: Rugged construction withstands recoil and impact.
  • Hard Anodized Finish: Highly durable low-glare matte finish helps camouflage the shooter’s position.
  • ArmorTek: Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt.

Convenience:

  • Unlimited Eye Relief: Non-critical eye relief for rapid target acquisition.
  • Battery Life: 14-hour auto-shutdown feature maximizes battery life. Up to 150 hours of use at highest setting. Use at the more common lower settings can allow up to 30,000 hours.

6 MOA Dot

  • The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.

Comes with:

  • Weaver / Picatinny mount
  • T-10 Torx wrench
  • CR 2032 battery
  • Lens cloth
  • Flathead wrench
  • Protective cover

Specs:

Image Clarity:

Reticle Type Second Focal Plane Reticle 6 MOA Dot
Illuminated Yes; Red Illumination Settings 9
Light Management System Standard Glass Type Standard
Lens Coating Fully Multi-coated, ArmorTek Eye Relief (in; mm) Unlimited
Diopter Type Non-Adjusting Parallax Adjustment No
Parallax Free Distance (yd) Unlimited

Image Adjustment:

Min Magnification 1x Max Magnification 1x
Objective Lens Height (mm) ~16 Objective Lens Width (mm) ~26
Low Mag Field of View (ft @ 100 yds) Unlimited High Mag Field of View (ft @ 100 yds) Unlimited
Elevation Turret Style Recessed Elevation Adjustment Range (MOA) 130
Elevation Adjustment Value per Click (MOA) 1 Elevation Clicks per Rotation 30
Windage Turret Style Recessed Windage Adjustment Range (MOA) 100
Windage Adjustment Value per Click (MOA) 1 Windage Clicks per Rotation 30

Utility:

Locking Dial No Zero Stop No
Indexable Turret No Indexing Type No
External Rotation Indicator No Illumination Control Tactile Buttons
Locking Illumination No Auto-Shutoff (hrs) 14
Throw Lever N/A Nightvision Compatible Illumination No
Motion Sensor Capabilities No Electronic Reticle Leveler No
Sunshade/Killflash Compatible No

Physical:

Form Factor Open Micro Reflex Sight Attachment Interface FastFire Spec; Supplied Weaver Mount
Mount Height Low Finish Matte Black Anodized
Water Resistance Yes Fogproof No
Shockproof Yes Battery Type CR1632
Battery Life @ Max (hrs) 150 Battery Life @ Min (hrs) 30000
Weight w/o Mount (oz) 1.1 Weight w/ Mount (oz) 1.6
Overall Length (in) 1.9 Front Mounting Length (Slots) 5
Rear Mounting Length (Slots) 5 Total Mount Length (Slots) 5
Objective Housing Length (in; cm) ~0.5; 1.7 Objective Housing Width (in; cm) ~1.2; 3
Objective Housing Height (in; cm) ~1.1; 2.6 Eyepiece Housing Length (in; cm) ~0.5; 1.7
Eyepiece Housing Width (in; cm) ~1.2; 3 Eyepiece Housing Height (in; cm) ~1.1; 2.6
Magnification Ring Outside Diameter N/A Turret Saddle Depth (in; cm) N/A

Additional Information:

Lug/Screw Footprint: Directly compatible with the Burris Fastfire/Docter interface.  Mounts to Glock MOS slides when using plate #1 (for 9mm and .40 cal) or plate #5 (for .45 cal or 10mm).  Mounts to M&P slides with plate 5 while using “B” screws.  Mounts to the FNX-45 with the non-Trijicon plate.  Mounts to Sig P220 series pistols and 1911s with a separate mount from EGW.  Mounts to Springfield XD/XDM pistols with a separate mount from Springer Precision.

Manufacturer SKU VMD-3106
Vortex Canada SKU VT-VMD-3106

Disclaimer:

Manufacturers, importers, suppliers, and distributors may make changes to their products without fanfare. Such changes can lead to discrepancies between the advertised product and the actual product in inventory. While International Shooting Supplies Ltd. endeavors to correctly describe the actual product in inventory, we will not be responsible for unintentional inaccuracies in text and images of the advertised product.

Weight 0.6 kg
Manufacturer

Vortex

Shopping Cart

Please note: International Shooting Supplies does not ship to addresses outside Canada.